IFM PN2293 Pressure Sensor with Display PN-025-REN14-MFRKG/US/ /V Arrived

 

 

 

 

Feature:

Pressure sensor with display

PN2293

PN-025-REN14-MFRKG/US/ /V

Two switching outputs, one of them programmable as IO-Link and one as analog output

Red/green display for clear identification of the acceptable range

The process connection can be rotated for optimum alignment

With long-term stability thanks to high overload protection

Robust design for use in harsh industrial environments

 

 

Product characteristics:

Number of inputs and outputsNumber of digital outputs: 2; Number of analog outputs: 1

Measuring range

-1...25 bar-14.5...362.5 psi-0.1...2.5 MPa

Process connectionthreaded connection 1/4" NPT Internal thread

Application

Systemgold-plated contacts

Measuring elementceramic-capacitive pressure measuring cell

Applicationfor industrial applications

Medialiquids and gases

Medium temperature[°C]-25...80

Min. bursting pressure

350 bar5075 psi35 MPa

Pressure rating

150 bar2175 psi15 MPa

Vacuum resistance

-1000 mbar-0.1 MPa

Type of pressurerelative pressure; vacuum

MAWP (for applications according to CRN)

70 bar1015 psi7 MPa

Electrical data

Operating voltage[V]18...30 DC; (to SELV/PELV)

Current consumption[mA]< 35

Min. insulation resistance[MΩ]100; (500 V DC)

Protection classIII

Reverse polarity protectionyes

Power-on delay time[s]0.3

Integrated watchdogyes

Inputs / outputs

Number of inputs and outputsNumber of digital outputs: 2; Number of analog outputs: 1

Outputs

Total number of outputs2

Output signalswitching signal; analog signal; IO-Link; (configurable)

Electrical designPNP/NPN

Number of digital outputs2

Output functionnormally open / closed; (configurable)

Max. voltage drop switching output DC[V]2

Permanent current rating of switching output DC[mA]250

Switching frequency DC[Hz]< 500

Number of analog outputs1

Analog current output[mA]4...20; (scalable 1:5)

Max. load[Ω]500

Analog voltage output[V]0...10; (scalable 1:5)

Min. load resistance[Ω]2000

Short-circuit protectionyes

Type of short-circuit protectionyes (non-latching)

Overload protectionyes

Measuring/setting range

Measuring range

-1...25 bar-14.5...362.5 psi-0.1...2.5 MPa

Analog start point

-1...20 bar-14.5...290 psi-0.1...2 MPa

Analog end point

4...25 bar58...362.5 psi0.4...2.5 MPa

Factory setting / CMPT = 2

Set point SP

-0.85...25 bar-12...362.5 psi-0.085...2.5 MPa

Reset point rP

-0.95...24.9 bar-13.5...361 psi-0.095...2.49 MPa

Min. difference between SP and rP

0.15 bar1.5 psi0.015 MPa

In steps of

0.05 bar0.5 psi0.005 MPa

Status_B High Resolution / CMPT = 3

Set point SP

-0.84...25 bar-12.2...362.6 psi-0.084...2.5 MPa

Reset point rP

-0.95...24.9 bar-13.7...361.1 psi-0.095...2.49 MPa

Min. difference between SP and rP

0.11 bar1.5 psi0.011 MPa

In steps of

0.01 bar0.1 psi0.001 MPa

Accuracy / deviations

Switch point accuracy[% of the span]< ± 0,4; (Turn down 1:1)

Repeatability[% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)

Characteristics deviation[% of the span]< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)

Hysteresis deviation[% of the span]< ± 0,1; (Turn down 1:1)

Long-term stability[% of the span]< ± 0,05; (Turn down 1:1; per 6 months)

Temperature coefficient zero point[% of the span / 10 K]< ± 0,2; (-0...80 °C)

Temperature coefficient span[% of the span / 10 K]< ± 0,2; (-0...80 °C)

Notes on the accuracy / deviationswitch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%

Reaction times

Response time[ms]< 1.5

Delay time programmable dS, dr[s]0...50

Damping process value dAP[s]0...4

Damping for the analog output dAA[s]0...4

Max. response time analog output[ms]3

Software / programming

Parameter setting optionshysteresis / window; normally open / closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output

Interfaces

Communication interfaceIO-Link

Transmission typeCOM2 (38,4 kBaud)

IO-Link revision1.1

SDCI standardIEC 61131-9

SIO modeyes

Required master port classA; (when pin 2 not connected: B)

Supported DeviceIDs

Type of operationDeviceID

Factory setting / CMPT = 2472

Status_B High Resolution / CMPT = 3988

Note

For further information please see the IODD PDF file at "Downloads"

Factory setting / CMPT = 2

ProfilesSmart Sensor: Process Data Variable; Device Identification, Device Diagnosis

Min. process cycle time[ms]2.3

IO-Link resolution pressure[bar]0.01

IO-Link process data (cyclical)

Functionbit length

pressure14

binary switching information2

IO-Link functions (acyclical)application specific tag

Status_B High Resolution / CMPT = 3

ProfilesSmart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)

Min. process cycle time[ms]3

IO-Link resolution pressure[bar]0.01

IO-Link process data (cyclical)

Functionbit length

pressure16

device status4

binary switching information2

IO-Link functions (acyclical)application specific tag

Operating conditions

Ambient temperature[°C]-25...80

Storage temperature[°C]-40...100

ProtectionIP 65; IP 67

Tests / approvals

EMC

DIN EN 61000-6-2

DIN EN 61000-6-3

Shock resistance

DIN EN 60068-2-2750 g (11 ms)

Vibration resistance

DIN EN 60068-2-620 g (10...2000 Hz)

MTTF[years]138

UL approval

UL approval numberJ012

Pressure equipment directivesound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g]223.5

Housingtubular

Dimensions[mm]Ø 34 / L = 90.7

Materialstainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC

Materials (wetted parts)stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM

Min. pressure cycles100 million

Tightening torque[Nm]> 50; (Depends on lubrication, seal and pressure rating)

Process connectionthreaded connection 1/4" NPT Internal thread

Restrictor element integratedno (can be retrofitted)

Displays / operating elements

Display

Display unit3 x LED, green (bar, psi, MPa)

Switching status2 x LED, yellow

Measured valuesalphanumeric display, red/green 4-digit

Remarks

Pack quantity1 pcs.

Electrical connection

ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated

 

 

More Models:

 

EVC810 IIR200 PK5524 EVC005 II0011 EVC004 SI5002 IGT205 O1D100 PQ3834 IFS204 TA2105 IFM216 EVF566 II5930 II5697 EVC002 IG5596 SI5010 II5687 KF5015 VTV122 SA5000 E21248 PN3094

SI6700 E30448 OY039S EY3099 E11855 G1501S E11252 PM1608 AL1930 EVC146 EVT006 LI5131 PT5404 PN7299 PN7209 AC1254 AC1258 SI6800 EC2082 AL1102 UGT524 EVC086 EVC003 OGH500 II5689 AC5222 AC5218 AC5233 SU7000 PN3093 PN2160 IM5115 SH0500 LR2050 MVQ101 IFC248 IFC234 IFC220 IN5225 IFT203 O5E700 IG6086 E12339 IGC222 EVC714 IGW201 IF5888 EVC597 IM5126 IGT220 IG5505 IG5401 EVS023 EVC812 VTV121 IIS204 IM0011 SM9000 IGT213 IFT205 PN2093 PN2094 E20005 OGE101 OGS100 PM1506 E33403 SD1540 SD6101 SD6501 SD8501 SD2501 SD8000 SD6020 SD6800 SD5500 SD6500 SD6601 SD8601 SD8500 SD1440 SD1540 SD5600 SD6050 SD5100 SD2500 SD6600 SD5000 SD8600 SD9500 SD5800 

We mainly supply Yokogawa,Emerson, Rosemount,Fisher,Honeywell,Siemens, ABB,FLUKE, Schneider Electric, Pepperl+Fuchs,MTL,Rockwell(Allen Bradley), Hirschmann, Eaton ,Moeller,FUJI,Omron, Yaskawa,Norgren,CHINT,Hach,Weidmuller,Phoenix, SMC,Testo, ASCO,Parker,Mitsubishi, Festo,GE, CISCO,Auma,IFM,GM,Turck,MOXA, Foxboro, Krohne, Swagelok, LS, Advantech, Dwyer,Endress Hauser, Bently Nevada,Moog etc.
 

 

 

 

Contact: